Guest WiFi v2 - Unifi Controller

Guest WiFi v2 - Unifi Controller

Setting Up a Guest WiFi Network with External Portal on a Unifi Controller


1. Navigate to your Unifi Controller. Note, it must be always online and reachable via the internet.

2. Go to the Settings Page

3. Click "WiFi"

4. Click Wi-Fi. Then create a new.

5. Click the "Name" field.

6. Put in a guest Wi-Fi name.

7. Click "Manual" next to Advanced

8. Select hotspot portal and apply any other settings that may be needed for this particular Wifi network.

9. Click add Wi-Fi network.

10. Then. Go back to the guest Wi-Fi you just created

11. Click on the link for the hotspot portal that appears. Note to get to this link without navigating through this shortcut is via Insights > Hotspot > Settings

12. It'll take you to the hotspot portal configuration page. Click on authentication.

13. Select one-way methods.

14. In the IP address. Enter this IP address: 13.54.236.37

15. Click save.

16. Go to settings.

17. Make sure you have show landing page enabled

18. Click "HTTPs Redirection Support"

19. Turn off encrypted URL.

20. Check Secure Portal

21. Check Domain

22. Enter this domain: wifi-sync.unipos.com.au

23. Hit save.



    • Related Articles

    • Ubiquiti Unifi (Controller 5.7+)

      Cloudkey/Unifi Controller Instructions Log in to your UniFi controller and click the Setting icon (bottom left).  On the left menu, under Wireless Networks click Create New Wireless Network and configure with: Name/SSID: Guest WiFi (or whatever you ...

    • WiFi Sync Setup for Open Mesh / Datto

      Log in to the CloudTrax portal at https://ct4.cloudtrax.com Or Use the Datto Networking Status Page  On the left, click on an SSID of your choice and configure with the following: SSID name: Guest WiFi (or whatever you wish) Enable: Enabled Visible: ...

    • Setting Up Unifi Admin Account for Wifi Sync

      1. Open your Unifi Controller 2. Navigate to the Admins/User Section. Note: For users connecting via the UI.com Site manager, this setting is found under "OS Settings" 3. Click on 'Add New Admin.' 4. Make sure remote access or UI account is switched ...

    • WiFi Sync setup for Meraki

      Click Configure > Access Control on the left menu. From the SSID dropdown, choose the one you wish to use, then configure with the below settings: Association Requirements Open (no encryption) Splash page Sign-on with my RADIUS server click Add a ...

    • Networking Troubleshooting

      Networking is critical to the success of the Point of Sale. Without a solid network, it is impossible to print tickets, open the cash draw and sync the POS between the devices. Important: Internet and Network are different. The local network is all ...