WiFi Sync Setup for Open Mesh / Datto

WiFi Sync Setup for Open Mesh / Datto

Log in to the CloudTrax portal at https://ct4.cloudtrax.com

Or Use the Datto Networking Status Page 


On the left, click on an SSID of your choice and configure with the following:


  • SSID name: Guest WiFi (or whatever you wish)
  • Enable: Enabled
  • Visible: Enabled
  • Authentication: Unticked
  • Splash page: Enabled
  • Splash page type: Hosted remotely
  • Splash page URL: https://wifi.unipos.com.au/access/
  • Splash page secret: uam175564uam
  • Splash page authentication type: RADIUS
  • Server address 1: rad1-apac.venuewifi.net
  • Server address 2: rad2-apac.venuewifi.net
  • Server secret: 6n8!5ETGb^nd
  • Block unauthenticated users: Enabled


Under Walled Garden, enter the following domains (one per line):


  • wifi.unipos.com.au
  • region3.purpleportal.net
  • venuewifi.com
  • openweathermap.org
  • cloudfront.net
  • stripe.com


If you wish to support social network logins, you also need to add the domains below for each network you plan to support, to the end of the 'Walled Garden' list above.


Facebook
facebook.com
fbcdn.net
akamaihd.net
connect.facebook.net
Twitter
twitter.com
twimg.com
LinkedIn
linkedin.com
licdn.net
licdn.com
Instagram
instagram.com
Weibo
(Chinese)
weibo.com
login.sina.com.cn




For all listed above, copy:


wifi.unipos.com.au
region3.purpleportal.net
venuewifi.com
openweathermap.org
cloudfront.net
stripe.com
facebook.com
fbcdn.net
akamaihd.net
connect.facebook.net
twitter.com
twimg.com
linkedin.com
licdn.net
licdn.com
instagram.com
weibo.com
login.sina.com.cn

Click Save Changes at the top right to finish.



    • Related Articles

    • WiFi Sync setup for Meraki

      Click Configure > Access Control on the left menu. From the SSID dropdown, choose the one you wish to use, then configure with the below settings: Association Requirements Open (no encryption) Splash page Sign-on with my RADIUS server click Add a ...

    • Networking Troubleshooting

      Networking is critical to the success of the Point of Sale. Without a solid network, it is impossible to print tickets, open the cash draw and sync the POS between the devices. Important: Internet and Network are different. The local network is all ...

    • Ubiquiti Unifi (Controller 5.7+)

      Cloudkey/Unifi Controller Instructions Log in to your UniFi controller and click the Setting icon (bottom left).  On the left menu, under Wireless Networks click Create New Wireless Network and configure with: Name/SSID: Guest WiFi (or whatever you ...

    • Pairing Albert to POS

      To repair Albert, follow these steps: On your Albert Terminal, Open the Kounta App. Then login using your Admin username and password (this is your backoffice password). Click on the POS button in the top right corner Scroll down to find the your ...

    • Epson Printer not Printing - Flashing Error LED Light

      Error LED SOLID on with no printing ❏ Check whether the roll paper cover is closed. If it is open, close it. ❏ If the Paper LED is on, check whether the roll paper is correctly installed and any roll paper remains. Error LED flashing with no printing ...